Advantages Of Single Edge Thread Milling Cutter

1. The cost is lower. Although a single thread milling cutter is more expensive than tapping, the cost of a single threaded hole is lower than tapping.

2. Higher accuracy. The thread milling cutter realizes the accuracy by cutter compensation. Customers can choose the thread accuracy they need at will.

3. Good finish. The teeth milled by the thread milling cutter are more beautiful than the thread tapping.

4. Long service life. The service life of thread milling cutter is more than ten times or even tens of times that of screw tap, reducing the time of tool change and machine adjustment.

5. It is not afraid of breaking. The workpiece may be scrapped after the screw tap is broken. The thread milling cutter is easy to take out even if it is broken artificially, and the workpiece will not be scrapped.

6. The machining efficiency of thread milling cutter is much higher than that of screw tapping.

7. Blind hole thread milling cutter can be milled to the bottom, but screw tapping is not allowed.

8. For some materials, the thread milling cutter can drill holes Milling teeth The chamfering is formed at one time, and the tapping is not allowed.

9. A thread milling cutter can process internal and external threads with different rotation directions, but not tapping.

10. For threaded holes with the same pitch and different sizes, several taps need to be replaced, and the thread milling cutter can be universal.

11. The first inspection of the threaded hole is not outdated. The thread milling cutter can be corrected by cutter compensation, but not by screw tapping. The workpiece can only be scrapped.

12. When machining large threaded holes, the tapping efficiency is low, and the thread milling cutter can be realized instantaneously.

13. The cutting of thread milling cutter is short powder chips, which is not possible to wrap the cutter. The tapping is processed into spiral iron chips, which is easy to wrap the cutter.

14. For non full tooth contact cutting with thread milling cutter, the machine load and cutting force are smaller than those of screw tapping.

15. Simple clamping, flexible tapping tool handle is required for screw tapping, and Er is available for thread milling cutter HSK hydraulic pressure. Heat rise, etc.

16. A detachable thread milling cutter rod can replace the metric system American made British blade, good economy.